4
INSTALLATION
To install the apparatus, it is necessary to allow enough space to accommodate the bend radius
of the optical cable connected to it. The transmitter/receiver requires as short as practical
Category 5 or 6 UTP cables to transmit Ethernet data. The RJ45 connector is applied for the
Ethernet port.
POWER SUPPLY
The N3787 series is powered by a plug-in 24VAC@830mA power supply with 2-pin terminal
block connector.
Figure 1. External power supply
Note:
When the series is powered together with other devices (cameras and etc.) by a single
24VAC power source, please make sure that the related device has a full-wave (bridge)
rectifier circuit.
