3
ORDERING INFORMATION
Fiber Type
35 Multimode
37 Single-mode
Video NO
2 Channel
4 Channel
6 Channel
8 Channel
Product Type
T Transmitter
R Receiver
Distance
A 25km
B 50km
C 75km
Enclosure
M Stand-alone module
R Card unit
Network management (NM)
M
With NM function
Omit
Without NM function
Use the configuration chart below to select the options available for this product.
Note:
1. The transmission distance category is only valid for single-mode product.
2. There are only TA and RA for multimode product, and can transmit 2km.
INSTALLATION
Installation of video interface
To install the apparatus, it is necessary to allow enough space to accommodate the bend
radius of the optical cable connected to it. The transceiver requires practical BNC terminated
coaxial cables to input/output the video signals.
Installation of card unit
Push the card unit along the guide rails (not in spaces between the rails). There is an Infinova
logo on the front panel indicating the proper orientation. Press hard to make good connection
to motherboard - loud snap indicates firm connection. There are two captive screws on the
front panel that can fasten the card unit to the sub-rack. They must be locked by hand in a
clockwise manner (do not over tighten).
