background image

2

TSS-750

The TSS-750 satellites are designed to be mounted on the wall.
There is a wall bracket for each satellite speaker.

NOTE:

The customer is responsible for the correct selection 

and use of mounting hardware (available through hardware stores)
that will ensure the proper and safe wall-mounting of 
the speakers.

Step 1.
Mark the positions on the wall where you would like to place the
mounting screws.

Step 2.
Place bracket against wall and fasten two appropriate screws
through the bracket’s screw holes into the wall.

Step 3.
Place the speaker on the wall by sliding the opening on the bottom
of the speaker over the bracket hook on the wall. Once positioned
properly, the speaker should slide down slightly and become
secure.

keyhole on the back of the speaker to the screwhead on the wall.
Once positioned properly, the speaker should slide down slightly
and become secure.

Left and Right Front Channels

For left and right front channels, place one satellite to the left and
another to the right of the television, as shown in Figure 1.
Since the speakers are magnetically shielded, you can place them
very close to the TV without worrying about the magnetic field 
distorting the picture.

Center Channel

For the center channel, place the speaker directly on top of,
or below, your television. Use a shelf if the television does not 
provide a stable platform.

Surround Channels

For left and right surround channels, place one speaker on the left
and another on the right, to the side of or slightly behind the 
listening area. The surround speakers should be mounted at a
height of between 1.2 and 2 meters.

Subwoofer

Since the installation of a subwoofer can be somewhat more 
complicated than installing full-range speakers, it is essential that
you read this section very carefully prior to connecting the 
subwoofer to your system. Should you have questions relating to
installation, it is advisable to call either your dealer or Infinity’s
Customer Service Department for advice.

The performance of the subwoofer is directly related to its 
placement in the listening room and how you align the subwoofer
with the satellite speakers. Setting the volume of the subwoofer 
in relation to the left and right speakers is also of critical
importance because it is essential that the subwoofer integrate
smoothly with the entire system. Setting the subwoofer’s volume
level too high will result in an overpowering, boomy bass. Setting
the volume level too low will negate the benefits of the subwoofer.

Here are several additional facts on installation that may prove
useful. It is generally believed that low frequencies (below 125Hz)
are nondirectional and, therefore, placement of a subwoofer within
any listening room is not critical. While in theory it is true that the
larger wavelengths of extremely low frequencies are basically
nondirectional, the fact is that, when installing a subwoofer within
the limited confines of a room, reflections, standing waves and
absorptions generated within the room will strongly influence the
performance of any subwoofer system. As a result, specific 
location of the subwoofer becomes important, and we strongly 
recommend that you experiment with placement before choosing a
final location. Placement will depend upon your room (for example,
whether or not your room permits placement of the subwoofer near
either satellite) and the amount and quality of bass required.

P

LACEMENT

W

ALL

-M

OUNTING THE

S

ATELLITES

NOTE:

The satellite speakers can be placed directly on a shelf,

or mounted on a wall using the wall brackets included.

Figure 3.

®

Bracket on wall.

Summary of Contents for Total Solutions TSS-750













Reviews: