background image

7

TSS-750

TSS-750

Satellites

Center Channel

Frequency Range:

120Hz – 20,000Hz (±3dB)

120Hz – 20,000Hz (±3dB)

Recommended
Amplifier Power Range:

10 – 100 watts

10 – 125 watts

Sensitivity:

88dB

89dB

(2.83V @ 1 meter)

Nominal Impedance:

8

8

Crossover Frequency:

3500Hz, 24dB/Octave

3500Hz, 24dB/Octave

Midrange Driver(s):

90mm (3-1/2") MMD,

Dual 90mm (3-1/2") MMD,

magnetically shielded

magnetically shielded

High-Frequency Driver:

19mm (3/4") MMD,

19mm (3/4") MMD,

magnetically shielded

magnetically shielded

Dimensions (H x W x D):

194mm x 143mm x 140mm

165mm x 432mm x 133mm

(7-5/8" x 5-5/8" x 5-1/2")

(6-1/2" x 17" x 5-1/4")

Weight:

1.1kg (2.5 lb)

2.0kg (4.5 lb)

Powered Subwoofer

Frequency Range:

34Hz – 150Hz (±3dB)

Amplifier Output:

150 watts RMS, 500 watts Peak

Low-Frequency Driver:

250mm (10") MMD

Crossover Frequency:

50Hz – 150Hz, 24dB/Octave, continuously variable

Dimensions (H x W x D):

419mm x 273mm x 400mm

(16-1/2" x 10-3/4" x 15-3/4")

Weight:

12.7kg (28 lb)

Infinity continually strives to update and improve existing products, as well as create new ones.The specifications and construction details in this and related Infinity publications are 

therefore subject to change without notice.

S

PECIFICATIONS

Summary of Contents for Total Solutions TSS-750













Reviews: