Infinity SR-TWDN620SA, Instruction Manual

Page: 14 / 19

24 | SR-WDN620 SA/SD; SR-TWDN620 SA/SD SR-WDN620 SA/SD; SR-TWDN620 SA/SD | 25
ENG
SENS-UP
If this mode is activated, the camera automatically detect light level and maintains a clear pic-
ture.
Off : Deactivate the Sens-Up function •
On : Activates the Sens-Up function. Press “Set Button” to adjust brightness by increasing or •
decreasing the shutter speed (x2 ~ x512)
The higher gain level, the brighter pictures, but the higher noise.
INITIAL SET
To return the default setting , which is defined in Exposure Menu
PREVIOUS: Go to Mani Menu
Remark
If you press the SET button in “AUTO” mode, you can adjust brightness by increasing or •
decreasing the shutter speed (X2 ~ X512)
The higher the zoom level, the brighter the screen, but the more likely it is that an after-image •
will appear.
Although Noise, Spots and Whitish symptoms may occur in Sens-Up operation when the •
zoom level is increased. But this Is normal.
This is to display pictures in color or black and white. •
Select “DAY/NIGHT” by using Joystick S/W with Up / Down Direction. •
Press “ Set Button” to enter “DAY/NIGHT. ” Select the desired mode for displaying the pic- •
ture.
OSD INSTRUCTION
5.4
DAY/NIGHT
Color : The picture is always displayed in color. •
B/W : The picture is always displayed in Black and White. You can turn on or off the burst •
signal on B/W mode.
Auto : The mode is switched to Color in a normal environment, but switched to •
B/W mode when ambient illumination is low. To set up the switching time or speed for Auto •
mode, press “Set Button”. You can turn on or off the burst signal on B/W mode. Filter Delay
is to dwelling time to convert Color to B/W
ISC : Intelligent IR Saturation Control (IR LEDs Version Only) Activate ISC On mode to achieve
•
a clear picture by reducing IR Saturation.
Remark : Day / Night will not be activated when AGC in the EXPOSURE menu is OFF.
WDR (WIDE DYNAMIC RANGE)
WDR illuminates darker areas of an image while retaining the same light level for brighter areas
to even out the overall brightness of images with high contrast between bright and dark areas.
Low / Middle / High : Select your desired mode •
OSD INSTRUCTION
WDR ON WDR OFF
5.5
WDR / BLC / ECLPS