10
11
Placing & Moving Your Massage Chair
Placing & Moving Your Massage Chair
Safe Placement
Ensure there is adequate space for installing the chair.
• Back: Minimum 4 in. from the wall and any objects or obstacles
• Front: Minimum 24 in. from any objects or obstacles
• Place on a dry, level surface.
• Do not place in direct sunlight or in places of high temperature.
Floor Protection
Place the massage chair on a carpeted or other padded surface in order to avoid
scratching or damaging the floor.
Massage chair
Floor
Carpet
Moving the Massage Chair
• Ensure the chair is in its full upright
position. Turn it off and unplug the
power cord.
• Lift the front part of the chair as shown
below. One person should raise the
front part by holding the moving
handle, while another person holds the
top of the chair from behind and
pushes.
Caution
• Do not move the massage chair when someone is sitting in it. This could cause
the chair to tip over, resulting in damage and injuries.
• Moving the massage chair may cause damage to floors. Floor protection, such
as rugs or carpet, is recommended.
• Do not drop or suddenly let go of the chair while moving, as this may damage the
chair and floor.
• Do not try to move the chair by pulling on the cord or the armrest. Only hold the
moving handle in the back and front.
• To avoid injury and minimize risk of dropping the chair, we recommend that two
people lift the chair.
• Before turning on the chair, make sure there is no damage to the power cord or
other exposed wires.
• Make sure the power switch is turned off before plugging in the chair.
Turn On Power Supply
• Plug the power cord into three-prong grounded outlet.
• Turn on the chair by pressing the button at the lower part of the exterior of the right
armrest.
Grounding Instructions
This product must be grounded. If it should malfunction or
break, proper grounding will reduce the risk of shock. This
product has a ground conducting cord and plug. The plug
must be plugged into an appropriate outlet that has been
properly installed and grounded in accordance with all local
codes and ordinances.
DANGER: Improper connection of the ground conduction
plug can result in risk of shock. Check with a qualified
electrician or service technician if you are in doubt as to whether the outlet is properly
grounded. Do not modify the plug provided with the product. If it does not fit in the outlet,
have a properly installed outlet added by a qualified technician. This product is for use on a
normal 120V circuit and has a grounding plug that looks like the plug illustration to the
right. Make sure the product is connected to an outlet with the same configuration as the
plug. Never use an adaptor with this product.
