Infinity ONE, User Manual

Page: 24 / 33

24 Infinity:One Manual
NOTE : The drivers, BIOS and utilities bundled in the support DVD
may vary by models and are subject to change without notice.
4.1 About BIOS Setup
4.1.1 When to Use BIOS Setup ?
4.1.2 How to Run BIOS Setup ?
You may need to run the BIOS Setup when:
•
An error message appears on the screen during the system
booting up and is requested to run SETUP.
•
You want to change the default settings for customised
features.
•
You want to reload the default BIOS settings.
To run the BIOS Setup Utility, turn on the notebook and press
the [Del] key during the POST procedure.
If the message disappears before you respond and you still wish
to enter Setup, either restart the system by turning it OFF and
ON, or simultaneously pressing [Ctrl]+[Alt]+[Del] keys to restart.
Be noted that the screen snaps and setting options in this
chapter are for your references only.The actual setting screens
and options on your Notebook may be different because of BIOS
update.
The setup function only can be invoked by pressing [Del] key
during POST that provide a approach to change some setting
and configuration the user prefer, and the changed values
will save in the NVRAM and will take effect after the system
rebooted. The setup uses a menu interface to allow the user
to configure their system and the features are briefly listed as
follow.
Press [F7] key for Boot Menu.