12
13
Assembly Instructions
Assembly Instructions
2. Installing the Leg Rest
Note
Figure 1
Figure 2
Figure 3
Figure 4
Figure 1
Figure 2
（1）
（2）
Zipper
Velcro
3. Attaching the Headrest Cushion and Back Rest Pad
Figure 7
Figure 8
Figure 9
• After connecting the rear of the arm rest, align the front part of the arm rest with
the metal tube and insert the hook on the front of the arm rest to the corresponding
seat frame metal tube. (Figure 7)
• Press the arm rest downward until it is properly in place, then push the front of the
arm rest upward. Align the hook on the arm rest with the metal tube on the front of
the chair. Move the arm rest gently to ensure it is attached well. (Figure 8)
• Align the hole on the metal tube with the corresponding piece on the front of the
arm rest. Tighten the Phillips head screw on the arm rest frame with a Phillips
head screw driver. (Figure 9)
• After completing installation on one side, repeat the above steps for the other arm
rest.
• Install the rotating shaft on the fixed axis on the leg rest. Align the hole on the
assembly for the R-shaped pin, as shown below. (Figure 1)
• Attach the leg rest to the chair body. (Figure 2)
• Connect the R pin on one side, and then on the other. (Figure 3)
• The leg rest installation is complete. (Figure 4)
• When the chair is operating in zero gravity position and the calf rest is raised, do
not press on the calf rest, as this could cause the chair to fall forward and cause
injury.
• Ensure that the massage roller mechanism is in the original position when you
sit down in order to avoid discomfort on your gluteus muscles.
• Using the headrest and back cushions can reduce the massage intensity on your
neck and shoulders. You can decide how to use the cushions based on your
preferences. The back pad connects to the back rest by a zipper (1), while the
head cushion and back pad are connected by Velcro (2).
