58 | ISE-12ZWDN650 FD
ISE-12ZWDN650 FD | 59
ENG
Follow the steps below to mount the Dome Camera with the Corner Mounting Plate and Standard/Compact Pendent
Mount.
Make a cable entry hole on the wall to recess the cable(s).
•
Fix the Corner Mounting Plate on the corner of the wall with proper screws and screw anchors. Then run the
•
cable(s) through the hole on the Corner Mounting Plate with the Data Cable’s 22-pin cable coming out.
Fasten the Standard/Compact Pendent Mount onto the Corner Mounting Plate with the supplied screws and
•
washers. Then thread the cable(s) through the Standard/Compact Pendent Mount with the cable(s) coming out
of the Pendent Mount’s outlet.
Note: Please block the cable entry hole with the supplied sponge to avoid insects entering the Pendent
Mount. See the illustrations in section Compact Pendent Mount.
Attach the Waterproof Rubber to the Standard/Compact Pendent Mount.
•
Thread the cable(s) through the Indoor Mount Kit and join the Indoor Mount Kit to the Standard/Compact Pen-
•
dent Mount with the supplied screws and washers. Then adjust the Waterproof Rubber to the joint.
Connect the cable(s) to the Dome Camera.
•
Join the Dome Camera to the Indoor Mount Kit with the supplied screw and washers.
•
Corner Wall Mounting: Corner Standard/Mini Mounting Plate +
Standard/Compact Pendent Mount + Indoor Mount Kit
ITEMS NEEDED:
Dome Camera
•
Data Cable (supplied)
•
Ethernet Cable (network Dome Camera)
•
Standard/Compact Pendent Mount and equipped items (optional accessory)
•
Corner Thin/Wide Box (optional accessory)
•
Indoor Mount Kit (optional accessory)
•
7.5.2
CORNER THIN/WIDE BOX MOUNTING
Waterproof Rubber (Indoor Mount Kit’s accessory)
•
Screws and Screw Anchors for fixing the Corner Thin/Wide Box (not supplied)
•
TOOLS NEEDED:
Tool for drilling
•
Tool for screwing
•
Follow the steps below to mount the Dome Camera with the Corner Thin/Wide Box and Standard/Compact Pendent
Mount.
Make a cable entry hole on the wall to recess the cable(s).
•
Fix the Corner Thin/Wide Box on the corner of the wall with proper screws and screw anchors. Then run the
•
cable(s) through the hole on the Corner Mounting Plate with the Data Cable’s 22-pin cable coming out.
Fasten the Standard/Compact Pendent Mount onto the Corner Thin/Wide Box with the supplied screws and
•
washers. Then thread the cable(s) through the Standard/Compact Pendent Mount with the cable(s) coming out
of the Pendent Mount’s outlet.
Note: Please block the cable entry hole with the supplied sponge to avoid insects entering the Pendent
Mount. See the illustrations in section Compact Pendent Mount.
Attach the Waterproof Rubber to the Standard/Compact Pendent Mount.
•
Thread the cable(s) through the Indoor Mount Kit and join the Indoor Mount Kit to the Standard/Compact Pen-
•
dent Mount with the supplied screws and washers. Then adjust the Waterproof Rubber to the joint.
Connect the cable(s) to the Dome Camera.
•
Join the Dome Camera to the Indoor Mount Kit with the supplied screw and washers.
•
Corner Box Mounting: Corner Thin/Wide Box + Standard/Compact Pendent
Mount + Indoor Mount Kit
DOME CAMERA INSTALLATION
DOME CAMERA INSTALLATION
Summary of Contents for ISE-12ZWDN650 FD
Page 37: ...www infinity cctv com ...
