Infinity HTS-20, Service Manual

Page: 10 / 34

Figure 7.
- Use this method when
connecting two subwoofers to
satellites.
If you are using two subwoofers as a
stereo pair with a pair of satellites, connect
them as shown in Figure 7.
The subwoofer has a variable frequency
control that can be used to block unwanted
frequencies (between 50 - 150Hz) from
being reproduced by the subwoofer.
When you set this control depends on the
low-frequency capabilities of your satellite
speakers. Adjust this knob to the lowest
frequency that you satellite speakers were
designed to reproduce (refer to Operation,
step 7).
1 0
Amplifier/Subwoofer
BU-120/HTS-20
HTS-20 - Has no external control. If you are
using a receiver or surround processor
containing a Dolby Digital and/or DTS
decoder, set the crossover bypass switch
to "On". If you are using a stereo or Dolby
Pro Logic receiver, set this switch to "Off";
this places the preset roll-off crossover
frequency point at 100Hz.
BU-120