Infinity 890 HD Instruction For User, Installation & Servicing Download Page 2

Page: 2 / 60

P a g e

LT7593 Issue No 1 (03/2017)

Contents

EXTENDED FIVE YEAR PARTS WARRANTY .............................................................................................................................. 1

Benchmark Scheme ............................................................................................................................................................. 2

Introduction

....................................................................................................................................................................... 3

Consumer Protection Information

.................................................................................................................................... 3

Lighting the Appliance & General Operation Of Control

.............................................................................................. 5

Auto (Thermostatic) Control

............................................................................................................................................. 7

Menu features

.................................................................................................................................................................... 8

Changing The Handset Batteries.

.................................................................................................................................... 8

Cleaning the 890 HD Appliance

...................................................................................................................................... 9

Fuel Bed Layout

............................................................................................................................................................... 10

WALNUT FUEL BED LAYOUT

.............................................................................................................................................. 12

SILVER BIRCH FUEL BED LAYOUT

...................................................................................................................................... 16

Technical Specification

.................................................................................................................................................. 22

Siting the Appliance

....................................................................................................................................................... 23

Installation of the Appliance

.......................................................................................................................................... 31

Commissioning the Appliance

...................................................................................................................................... 38

Annual Service Requirement.

........................................................................................................................................ 42

Fault Finding Charts

......................................................................................................................................................... 44

Maintenance

................................................................................................................................................................... 48

Short Spares List

............................................................................................................................................................... 51

Your Fire Years Parts Extended Warranty

...................................................................................................................... 52

Four Year Service Log Details

......................................................................................................................................... 53

GAS FIRE COMMISSIONING CHECKLIST

.......................................................................................................................... 54

Register Your 12 Month Warranty with Us Today

.......................................................................................................... 55

EXTENDED FIVE
YEAR PARTS
WARRANTY

In order to validate your extended 5 years parts

warranty please read the Benchmark Scheme and

ensure your installer has filled in the appropriate

checklist.

Summary of Contents for 890 HD





























































Search results

Summary of Contents for 890 HD

Reviews:

Infinity 890 HD, Instruction For User, Installation & Servicing, Page: 2 / 60

Search results

Summary of Contents for 890 HD

Reviews: