Infinity 200300, Manual

Page: 23 / 52

22
Ordercode: 200300
TCYC-7 Cyclorama
6. CCT Mode
In this menu you can choose between different outputs in the CCT mode.
01) While in the main menu, press the UP/DOWN buttons until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose between and .
04) If you choose , the color rendering index is maximized at the expense of the output.
The device reaches a minimum of 96 CRI with a maximum of 97,7. This is reached around 3000K.
05) If you choose , it will maximize the output at the expense of a lower CRI. The CRI will be
reduced to at least 93 CRI while delivering between 20-30% of additional brightness depending on
the color temperature.
06) Press the ENTER button to confirm.
7. Tungsten Simulation
In this menu you can simulate several outputs of a Tungsten fixture.
01) While in the main menu, press the UP/DOWN buttons until the display shows .
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to choose the desired output. Choose one of the 4 options
.
04) Press the ENTER button to confirm.
05) In Tungsten mode, the fixture will use its own special Dimmer curve, so you can’t use the dimmer
curves from the main menu. They won’t work in the Tungsten mode.
06) In Tungsten mode, the fixture uses its own dimmer timing, so Dimmer Speed will not work either.