MAINTENANCE
28
If you cannot deal with the problems by yourself and need help:
• Press the
【
On/Off
】
button
.
• Pull out
the mains plug and call the service
.
Warning!
！
• Clean lint filter and
.
• Empty the water container.
• Check the drain hose.
• Check installation place is appropriate.
• Keep the air inlet clean
.
• Use higher drying intensity level programme or
time programme.
heat exchanger
• “ ”is lighting
•“ ”is
ing
light
Problem
Solution
•Display is not on
• Check if the power supply works.
• Check if the mains plug is inserted.
• Check the selected programme .
• Press the
【
On/Off
】
button.
• Clean the lint filter.
•Dryer does not start
•
• Turn
on
the
tumble
dryer.
• Check the the door is closed.
• Check the programme is set.
• Press the
【
Start/Pause
】
button.
Connect
the
tumble
dryer
to
the
mains.
•Degree of dryness was
reached or drying time too
long
not
•There are humming noises
• The compressor is operating. These noises are
quite normal and do not indicate a fault.
•The dryer switches off at
the end of the programme
• The dryer switches off automatically for energy
saving. This is not an error but a normal function.
• Check the water container. If it's full, please pour
out the condensate water and restart the dryer.
• If
the
container
is
not
full,
please
restart
the
dryer
directly
.
• If the “ “ icon is still lighting after you have
finished the first two steps, please call the service.
