second time ,the product works with low heating(1000W) and display shows“-- /
”.
Press third time, changes to high heating(2000W) and display shows “--/
”.then
press fourth time ,enter into swing and display shows “--/
”, Press fifth time ,
change to stand by.and display shows“0”
3
. Press” “ button to set timer(00-12hours). Pressing the button one time increases one
hour for timer. After setting time, the display will show current setting time for 5 seconds,
then resume to previous display, meanwhile the light of ” “ will on. Below photo is an
example of setting 8h:
4. Appointment “ON”:
In standby mode, press timer button, you can set the
appointment turn-on time in 00-12 hours. After complete setting, the display shows the
appointment turn-on time and also the light ” “ is on. The display automatically
decreases 1 hour for each hour passed. When the appointment power-on time arrived, the
product will automatically turns on. The default setting temperature is 23
℃
during
appointment turn-on. Below photos is an example to set appointment turn-on time to 8
hours:
