Installation of the heater
B
efore using the heater,
you must attach the legs
(supplied separately
in the box) to the unit. You must dock
The legs to the base of the heater
with the 8 screws supplied,
making sure they are placed
correctly at the lower ends of the side
moldings of the heater.
NOTE: It is normal that heaters that are lit for the first time, or when
they are turned on again after a long period of time without having
used them, give off some smell of smoke. These will disappear when
the heater is on for a period of time.
1. Choose a suitable place to place the heater, taking into account the
safety instructions indicated above.
2. Connect the plug of the heater to a suitable outlet.
3. Turn the thermostat knob fully clockwise until the maximum setting
is selected.
4. Turn on the heater components, using the rocker switches on the
side panel. When the heating components are on, the switches will
illuminate. To get the maximum hot air out, both switches must be on.
Functioning
