Infiniton FG-219B, User'S Operation Manual, Page: 43 / 81

1 5
t
6. Place the upper door on a smooth
surface with its panel upwards. Loose
screw @ and part CD, then lnstall
them to the left side and tighten securely.
®
Self-tapping screw
O
CD Stop block
f:
-==�
7. Unscrew the two special flange self­
tapping screws which are used for fixing
the middle hinge part, then remove the
middle hinge part that hold the lower door
in place.
NOTE: When removing the door, watch
for washer(s) between the lower hinge
and the bottom of the lower door that
may stick to the door. Do not lose.
t
8. Place the lower door on a smooth
surface with its panel upwards. Loose
screw @ and part CD, then lnstall
them to the left side and tighten securely.
® Self-tapping screw
a
(i)Stopblock
___," --CD
1 --@
9. Change screw hole covers on middle
cover plate from left to right (as shown in
figure below).
1 O. Lay the refrigerator on soft foam
packaging or similar material. Remove
both adjustable bottom feet parts, and
the lower hinge part by unscrewing
the special flange self-tapping screws.
@--\9
CD Lower hinge part (right)
® Adjustable bottom feet part
®
Self-tapping screws