13
14
MAINTENANCES
Filter clean
•
•
•
Clean the lint filter after each use.
Remove by pulling straight up.
Cleaning filter
Use wiping cloth or your fingers.
Install filter
If the filter is cleaned by damp cloth
or water, please install after
the sun dry.
Cleaning cabinet and inner tube
•
•
•
•
•
Use soft damp cloth wipe when
cleaning cabinet and inner tube.
Not to rinse by water direct.
Not to use neutral scour wipe.
Not to use gasolene and alcohol wipe.
Make sure open the front door for aeration after
cleaning the inner tube.
Cleaning And Care
Trouble
Will not start
External hot or
can smell hot
Clothes too dry
Clothes shrink
Hairball on
clothes
Power cut.
The power plug is not
plugged tight.
Dry clothes exceed.
The temperature fuse is cut.
The lint filter is dirty.
The uptake or exhaust duct
is dirty.
The clothes
in machine are
too full
.
Not to take out the clothes
in time when finish.
The clothes don’t assort
properly.
The temperature is enacted
too high.
Too dry
.
It is right for synthetic fibre
and permanent press fibre
causing hairballs.This is
because the right rub causing.
Wait for switching on electricity.
Check the power socket,make sure plug tight.
The clothes in dryer must be after spinning,
and drying clothes can not exceed 3kg.
Please career man restore the temperature fuse.
Make sure clean the lint filter in time.
Clean out the stem.
Make sure the clothes
are
not
too
full
.
Take out the clothes immediately when finish.
Observe the maintenance label on clothes.
for too dry.Then hang the clothes until full dry.
Observe the maintenance label on clothes.
if easy to shrink,should examine the clothes
when
dry.Take out the clothes when tiny damp
Use
fabric
softener
lubricate
fibre
,
please
spray
settled
gule
on
cuff
and
neckline
when
iron
clothes
.
Turn
the
sarcenet
out
for
reducing
rub
.
MAINTENANCES
Trouble Shooting
Cause
Solution
gas
alcohol
thinner
