RM24100D operating manual Page 4
Unicast Network configuration:
Parameter
RF Modem 1
RF Modem 2
Source Address
0x01
0x02
Destination address high
0
0
Destination address low
0x02
0x01
Broadcast Mode:
Any RF modem in range will accept a packet that contains a broadcast address. In this mode receiving
modems do not send ACK’s and transmitting modems do not automatically resend packets as in the case of unicast
mode.
Broadcast Network configuration (All modems in the network must be setup as):
Destination Low Address: 0x0000FFFF
Destination High Address: 0x00000000
Peer-to-peer/ point-to-point topography (Broadcast/Unicast Mode)
Point-to-multipoint topography (Broadcast Mode)
