1.4 Specifications
Model
TT-DT10-2G-8GP+
Hardware Specifications
Copper Port
10 10/100/1000BASE-T MDI/MDIX Ports (RJ45)
PoE Injector Port
8-port with 802.3at/af PoE injector function with Port-1 to Port-8 (RJ45)
Switch Architecture
Store-and-Forward
Switch Fabric
20Gbps/non-blocking
Switch Throughput@64 bytes
14.88Mpps@64 bytes
MAC Address Table
8K entries, automatic source address learning and aging
Maximum Frame Size
9K bytes
Flow Control
IEEE 802.3x pause frame for full-duplex
Back pressure for half-duplex
LED
System:
Power (
Green
)
10/100/1000BASE-T RJ45 interfaces:
10/100Mbps LNK/ACT (
Red
)
1000Mbps LNK/ACT (
Green
)
PoE interfaces:
PoE-in-Use (
Orange
)
DIP Switch
Selectable operation mode
Standard
VLAN
Extend
Dimensions (W x D x H)
220 x 150 x 43 mm (1U height)
Enclosure
Metal
Weight
1260 g
Power Requirements
AC 100~240V, 50/60Hz, 2.5A max.
Power Consumption/
Dissipation
Max. 120 watts/409.4 BTU
Thermal Fan
1
Power over Ethernet
PoE Standard
IEEE 802.3af Power over Ethernet/PSE
IEEE 802.3at Power over Ethernet Plus/PSE
PoE Power Supply Type
End-span
PoE Power Output
Per port 55V DC, 540mA. max. 30 watts
Power Pin Assignment
1/2(+), 3/6(-)
PoE Power Budget
120 watts
Max. Number of Class 2 PDs
8
Max. Number of Class 3 PDs
8
Max. Number of Class 4 PDs
4
Standards Conformance
Regulatory Compliance
FCC Part 15 Class A, CE
Standards Compliance
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3ab Gigabit 1000BASE-T
IEEE 802.3x Flow control and back pressure
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
IEEE 802.3az Energy Efficient Ethernet (EEE)
