INFINITE PLAY
Camera components and functions
1.
Lens:Fixed3.6mm lens.
2.
Light sensor
3.
Infrared LED
4.
DC 12V power input
The power input connects the DC power adapter to supply power
to the camera.
5.
Audio In (Red and White RCA connectors)
6.
Audio In (Red and White RCA connectors)
7.
Ethernet port
The port is used to connect the camera to your network via the
Ethernet cable (RJ-45 type). The port supports the NWay protocol
so that the system will be able to detect the network speed
automatically.
The port is compliant with IEEE802.3afPoE (Power over Ethernet)
standard. The camera can be powered on by the Ethernet cable
so that you can install the camera anywhere without a power outlet
supported.
8.
Reset Button
Hardware Installation
Installing the camera
Mount the camera dome base on the ceiling, and then you can adjust
the camera lens to any target place of object
Connecting the cables
To connect the Ethernet cable:
Use the RJ-45 type Ethernet cable to connect the camera to your local
area network (LAN). Plug one end of the Ethernet cable to the Ethernet
port of the camera and the other end to an active port on the
switch/router of the network.
To connect the DC power adapter:
Plug the 12V DC power adapter to the DC power input of the camera.
(required only if the PoE function is not used)
3
EN
Camera components and functions
1.
Lens:Fixed3.6mm lens.
2.
Light sensor
3.
Infrared LED
4.
DC 12V power input
The power input connects the DC power adapter to supply power
to the camera.
5.
Audio In (Red and White RCA connectors)
6.
Audio In (Red and White RCA connectors)
7.
Ethernet port
The port is used to connect the camera to your network via the
Ethernet cable (RJ-45 type). The port supports the NWay protocol
so that the system will be able to detect the network speed
automatically.
The port is compliant with IEEE802.3afPoE (Power over Ethernet)
standard. The camera can be powered on by the Ethernet cable
so that you can install the camera anywhere without a power outlet
supported.
8.
Reset Button
Hardware Installation
Installing the camera
Mount the camera dome base on the ceiling, and then you can adjust
the camera lens to any target place of object
Connecting the cables
To connect the Ethernet cable:
Use the RJ-45 type Ethernet cable to connect the camera to your local
area network (LAN). Plug one end of the Ethernet cable to the Ethernet
port of the camera and the other end to an active port on the
switch/router of the network.
To connect the DC power adapter:
Plug the 12V DC power adapter to the DC power input of the camera.
(required only if the PoE function is not used)
