SMALL
5)
Place the frame from the top and turning down.
6)
Unscrew slightly the M3 Torx screw at the bottom of the
frame.
PLEASE NOTE: The equipment must be directly and permanently mounted on a non
combustible surface such as concrete and metal. Supports or materials with poor self-
extinguishing requirements must be excluded.
3
EN
Terminal Blocks
• Line entrance panel with RJ45 connector
• Interconnecting cables used must be UL certified and must be compliant with the CEI 64/8 for video door entry systems:
- UTP CAT 5e for domestic routes dedicated to video door-phone system
- FTP CAT 5e shared routes with tension cables
- UTP CAT 5e for outside with protective sheath in PVC
All cables must be LSZH for Low Smoke Zero Halogen
Technical characteristics
• Brushed stainless steel exterior AISI 316 with ABS frame and glass parts are made from ultra-strong, scratch-proof.
• Ready to install flush mounted
• The night light is ensured by 4 efficiency LED
• Standby power consumption 7 mA , in conversation : 150mA
• Operating Temperature : -20
°
to 50
°
C
• Dust and Water Resistant - Rating IP54
• Mechanical impact resistance level: IK08
• Size : 100 x 135 x 20 mm
Maintenance
• Clean the entrance panel using a soft cloth. Do not use any type of chemical product.
extinguishing requirements must be excluded.
