Replacing Battery
To replace the Lin
ē
a-pro 4 battery, follow the steps below.
1. Remove the device as shown in the figure below.
Figure 13
2. Squeeze battery cover latch to the left as shown in the figure above.
Figure 14
3. Lift the battery cover as shown in the figure above. Remove the existing
Battery pack. Reverse Steps 1-2 to install the new battery pack.
Notice: Use only factory recommended replacement battery to prevent
damage to the Lin
ē
a-pro 4.
. . . . . . . . . . . . . . . . . . . .
Infinite Peripherals, Inc.
www.ipcprint.com
Page 17
Lin
ē
a-pro 4 User Manual v1.00
