Infinea X User Manual
Page 9 of 34
UM-00001 Version: C
DEVELOPING APPLICATIONS FOR YOUR INFINEA X
Software is not provided with your Infinea X. Please contact your reseller or Infinite Peripherals for
Third Party software solutions.
Integrating the Infinea X into your iOS application requires the use of the Infinite Peripherals Universal
SDK. The SDK incorporates an API specifically for developing applications to use the functionality of
the Infinea X; including, but not limited to, barcode scanning, read/write RFID and programmable LED
capability of the Infinea X.
For additional details on using the Infinite Peripheral Universal SDK, please refer to the SDKs
documentation.
For the latest Infinite Peripheral Universal SDK please visit our developer portal:
developer.ipcmobile.com/
PROGRAMMABLE OPTIONS
Optional settings for the Infinea X may be configured via the SDK.
Programmable
Options
Description
Set Charging
Enables or disables battery backup sharing capability to charge the
iOS device from the IX removable battery.
Charging Current
Charging current may be set to 500mA or 1A. Default setting is 1A.
Scan Mode
The Infinea X Mini supports the following Scan modes:
•
Single Scan
Scanning a single barcode by pressing the Scan button.
•
Multi Scan
Scanning multiple barcodes by pressing and holding the Scan
button.
•
Motion-Detect
Scanner is activated automatically when barcode is placed near
the barcode engine.
•
Multi-Scan without Duplicates
Scanning multiple barcodes without duplicates.
Pass Through
Sync
When the pass through sync setting is enabled and the USB cable is
plugged in, the iOS device may be synced with a PC or MAC. Default
setting is “OFF”.
Note:
If Pass Through Sync is enabled, the iOS device will not charge when
plugged into an external charger.
Time Out
Set timeout for 60 or up to 64800 seconds (18 hrs.).
Note:
Default setting is subject to change for this feature based on specific
use or integration.