Hybrid DVR User Manual
TEC-VS-219-1905-V01
6.8.4 PD - Pedestrian Detection
Pedestrian Detection function detects the moving people in a pre-defined region, and a series of
actions can be taken when the alarm is triggered.
Channel
: to select the channel to configure
Switch
: to enable or disable the PD function
Buzzer
: to disable or to active the buzzer to emit an alarm tone in 10, 20, 40 or 60 seconds when the
detection is triggered
Level
: Small, Middle and Big. Small level is recommended to detect objects in long distance. Big level
is recommended to detect objects in short distance.
Scene
: Scene setting includes Indoor and Outdoor. Choose the scene to match with the scene of the
installed camera.
Post Recording
: To set how long after an event occurs that the DVR will continue to record.
Latch Time
: To configure the external alarm time when the detection is triggered.
Alarm Out
: If the DVR support external alarm device, it can be set to emit an alarm tone.
Show Message:
A letter “S” will be displayed on the screen when the intelligent detection is triggered.
Send Email:
If an alarm is triggered, an Email will be sent to the preset email account.
Full Screen:
When the detection is triggered, the channel will be enlarged into full screen.
Record Channel:
to select the channel(s) to be recorded when detection is triggered.
Area:
Click [
Setup
] to draw a virtual region in the camera picture.
