Application Note
3
Revision 1.0
2016-11-01
Getting Started with the XDPL8220 Reference Board Using .dp Vision Software
1.2
Hardware Connection
After the required hardware tools are available, please follow the steps below to make the correct hardware
connection:
•
Connect the
.dp Interface Gen2
with the
USB Cable
to Notebook/PC
Figure 1
Connection from .dp Interface Gen2 to Notebook
Note:
The detection of the
.dp Interface Gen2
sometimes fails on USB3.0 ports. Therefore the use of a
USB2.0 port is recommended (which can be provided by an external USB2.0 hub if the machine
offers USB3.0 ports only).
•
Connect the
.dp Interface Gen2
with the
Programming Cable
to the
XDPL8220 Reference Board
Figure 2
.dp Interface Gen2 Connection
Note:
Please ensure that the connector of the
Programming Cable
is plugged in correctly: the red wire
indicates the Pin 1 and should be connected to the Pin Vcc on the
XDPL8220 Reference Board
.
USB
Cable
To
Notebook
