XC164CM
XC164CM Board
Quick Start Up
XC164CM series Board Manual
24
V 1.0, 2006-01
5.9
Program
Press the “Program” Button and check the result of the programming.
Figure 16
Program
After the successful program press “Disconnect Now”
5.10
Execution Mode
After the code is programmed in the internal flash the microcontroller has to be
configured in the standard start mode.
Figure 17
Standard start mode (DIP Switch S102)
After the reset buttom(blue) is pressed the program is executed from the internal flash.
3
2
4
1
