User Guide
17 of 25
002-35126 Rev. **
2022-05-10
WLC1115 MP-A11 15-W wireless power transmitter
(REF_WLC_TX15W_C1) user guide
Reference board operation
Figure 13
Device configuration dialog
Wait until the updated configuration file gets downloaded, as shown in
Figure 14
Successful download of configuration file
i)
Dismantle the hardware set-up
3.
Debug log capture set-up
a)
Do the following connections using jumper wires to establish a serial connection between the
REF_WLC_TX15W_C1
board and the HPI dongle:
•
Connect a jumper wire between the UART_Tx pin of J1 of
REF_WLC_TX15W_C1
board and Rx pin of J2
header on HPI dongle board
•
Connect a jumper wire between the GND pin of J1 of the
REF_WLC_TX15W_C1
board and the GND pin of the
J2 header on the HPI dongle board
b)
Connect
REF_WLC_TX15W_C1
, HPI dongle, and PC as shown in
