Technical Reference Manual
002-29852 Rev. *B
4.13.11.13 CM4_TPIU_ITCTRL
Description:
Integration Mode Control Register
Address:
0xE008EF00
Offset:
0xF00
Retention:
Retained
IsDeepSleep:
No
Comment:
This register enables the component to switch from a functional mode, the default behavior, to
integration mode where the inputs and outputs of the component can be directly controlled for
the purpose of integration testing and topology solving.
Default:
0x0
Bit-field Table
Bits
7
6
5
4
3
2
1
0
Name
None [7:1]
MODE [0:0]
Bits
15
14
13
12
11
10
9
8
Name
None [15:8]
Bits
23
22
21
20
19
18
17
16
Name
None [23:16]
Bits
31
30
29
28
27
26
25
24
Name
None [31:24]
Bit-fields
Bits Name
SW
HW
Default or
Enum
Description
0
MODE
RW
R
0
When set, the component enters integration mode,
enabling topology detection or integration testing to be
performed. At reset the component must enter
functional mode. If no integration functionality is
implemented, this register must read as zero.
656
2022-04-18
TRAVEO™ T2G Automotive MCU: TVII-B-E-4M body controller entry registers