2.3.3
Signal adaption
For easy signal adaption, for example connecting probes of an oscilloscope, test points are scattered across the
PCB. The label of each test point indicates the probed signal. For further information on the mapping between
test points and signals see
. The GND clip of the probe can be attached to one of several ground hooks
as shown in
Figure 6
Testpoint and GND hook example
OPTIREG
™
linear voltage regulator TLS820F3ELVxx demoboard
Z8F68163446
2 Demoboard
User manual
10
Rev. 1.0
2020-02-26