TLE9262-3BQX
General Product Characteristics
Data Sheet
21
Rev. 1.00, 2017-07-31
Note: There is no additional current consumption contribution due to PWM generators.
6) No pull-up or pull-down configuration selected.
7) The specified WKx current consumption adder for wake capability applies regardless how many WK inputs are activated.
8) A typ. 75µA / max 125µA (
T
j
= 85°C) adder applies for every additionally activated HSx switch in SBC Stop Mode;
In SBC Normal Mode every HSx switch consumes the typ. 75µA / max 125µA (
T
j
= 85°C) without the initial adder because
the biasing is already enabled.
9) HS1 used for cyclic sense, Timer 2, 20ms period, 0.1ms on-time, no load on HS1.
In general the current consumption adder for cyclic sense in SBC Stop Mode can be calculated with below equation:
IStop,CS = 18µA + (525µA *tON/TPer)
10) Also applies to Cyclic Wake
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from