8
Rev.
1.0
2018-08-01
TLE5501 Eval Kit
Evaluation Kit for Angle Sensors
3.3
How to calibrate
For analog angle sensors, the offset, amplitude and orthogonality of the raw signals sin and cos has to be
calibrated to achive high angl eaccuracy. This calibration procedure can be performed as described below:
Click Calibrate. The calibration window appears.
In den calibration window click Ok.
Rotate the magnet 360° in the direction shown in the
calibration window. If the red label turns green, press Ok.
Repeat the process for the other direction, press Ok.