Application Note
14
Rev. 1.0
2017-08-02
TLE5014 Programmer
Programming
3.4
Look-up table programming
The Browse LUT button opens a window to select a .txt file with the data which should be programmed into
the look-up table (LUT).
Opening the .txt file loads the content in the displayed EEPROM mapping.
After loading the file press Burn EEPROM to burn the LUT values to the EEPROM.
txt file with values for LUT
The .txt file for the LUT values consists of a header and 32 pair of data, separated by a comma. One pair
consists of the real angle value and the read out of the sensor at this position as a 12-bit value. The 32 real
angle values can not be modified and have to be 0°, 11.25°, 22.5°, … 348.75°.
Figure 5
Pair of data
Sensor readout (12-bit value)
Real position (in degree)
