4.2.6
Memory drop down menu
4.2.6.1
Basic Configuration
This menu item opens the Basic Configuration dialog window. This window allows the user to configure the
most important sensor settings. The description of the EEPROM settings is available on the User manual [2].
Figure 19
Basic Configuration window
By clicking on the Burn EEPROM button, the internal EEPROM of the sensors is effectively programmed.
In case an Infineon evaluation board is connected, the software will ask the user whether to update the
external EEPROM of the evaluation board to fit to the new programmed sensor settings, as shown in the figure
below. The external EEPROM content is shown in
. E.g. if the measurement range setting is
changed, the sensitivity of the sensors in [mV/A] is updated in the external EEPROM content.
Figure 20
External EEPROM content re-programming
TLE4972 Current sensor programmer
User guide
4 System and functional description
User guide
25
Rev. 1.00
2022-04-05
