TM
5 of 15
iMOTION2go
Starter kit for iMOTION
TM
ecosystem application note
Main features
3
Main features
iMOTION2go starter kits are intended for learning and practicing the iMOTION
TM
design platform, MCEDesigner
and MCEWizard. The main features of MCEWizard include:
Creation of parameter sets for full motor control system
Design of a script code for application adaption
Configuration for individual digital pins and analog pins
The main features of MCEDesigner include:
Programming and updating of code/parameters to controller IC
Controlling, monitoring and tuning of the motor drive system
Setup of a function that commands speed profiles for testing of specific application
The main characteristics of the demo board include:
Entire motor control system
Powered by PCB USB output
No hardware setup needed
Algorithm integrated in IMC101 iMOTION motor controller
System parameters pre-configured for instantaneous start of the motor
Pre-loaded with script that runs the varying speed demo
Free software tools for system monitoring and tuning
On-board-debugger chip for communication and programming of IMC101T chip
Table 1 lists all the important specifications of the evaluation board IMOTION2go.
Table 1
iMOTION2go specifications
Parameters
Values
Conditions
Input voltage
5 V
rms
USB socket
Motor phase current
50 mA
rms
Maximum DC bus voltage
16 V
generated on board
Minimum DC bus voltage
14 V
Shunt resistor RS1
1000 mΩ
Single shunt configuration
IPM power supply
15V±5%, max. 50 mA
For inverter IPM
Controller power supply
3.3V±2%, max. 20 mA
For IMC101T
PCB material
FR4, 2 layers, 2 oz
copper
PCB dimensions
62 mm x 22 mm
Ambient temperature
From 0 to 60°C
