Infineon iMOTION EVAL-M7-D111T, User Manual, Page: 9 / 25

User guide 9 of 24 V1.0
2021-04-15
EVAL-M7-D111T user guide
iMOTION™ evaluation board for smart driver
System and functional description
2.1.2 iMOTION TM development tools and software
When users want to test and evaluate this board, they need to calculate the variable parameters with their motor
via MCEWizard. Then they can use the MCEDesigner to tune the motor. For this, the iMOTION
TM
development tool
has to be installed on the computer. The tool can be downloaded from the Infineon website; the quick link is
included
here . Users can also find the related firmware IMD111T MCE software package on this webpage. The
iMOTION
TM
development tool includes MCEWizard and MCEDesigner. The MCEWizard calculates the parameters
of the firmware needed, and the MCEDesigner programs the parameters into flash, and does the tuning. Two
shortcut icons will appear on the Windows desktop after installing is finished.
Note: Please note that the iMOTION
TM
development tools described here are based on the version V2.3.
Some features may vary according to the different versions. Please also refer to the relevant
version of the user guide of MCEWizard or MCEDesigner.
2.1.2.1 MCEWizard setup overview
MCEWizard defines control gains, limits and fault levels based on real number inputs, and converts gains and
levels to parameter counts based on hardware and control limit settings. MCEWizard also exports parameters
and variable scale factors to the MCEDesigner.
•
Double-click the MCEWizard shortcut on Windows desktop, the MCEWizard welcome page is shown as in
Figure 4.
•
If users have the evaluation design kit MCEWizard configuration file, they only need to click the “ Open
System Configuration File ” button and changes the user’s motor parameters under test.
•
But if users do not have this evaluation design kit MCEWizard configuration file, they need to click the button
“ File ” and select “ Create System Configuration File ” . Then follow the pop-up window prompt to complete
the configuration step by step.
•
For this evaluation board, if users do not have the MCEWizard configuration file, they should click “ File ” and
select “ Create System Configuration File ” , then select the IMD111T device in the pop-up window. Next, click
OK and return to the welcome page, then select “ Customized Design for Expert User ” . Click the Next button
to answer all the questions concerning the hardware design and user test motor specification.
Figure 4 MCEWizard welcome page