Infineon iMOTION EVAL-M1-183M, User Manual, Page: 3 / 27

User Manual 3 <Revision 1.2>
<2018-06-27>
EVAL-M1-183M User Manual
iMOTION ™ Modular Application Design Kit
Introduction
2 Introduction
The EVAL-M1-183M evaluation board is a part of the iMOTION ™ M odular A pplication D esign K it for drives
(iMOTION ™ MADK). It is single PM motor control solution.
The MADK platform is intended to use various power stages with different control boards. These boards can
easily be interfaced through the 20 pins iMOTION
™ MADK-M1 or the 30 pins iMOTION ™ MADK-M3 interface
connector. This board is equipped with 20 pins connector.
This evaluation board is designed to give comprehensible solutions of sensorless control of permanent magnet
motors over the full speed range. It provides a capable of 3-phase and three types of 2-phase modulation, JTAG
and UART interface, isolated via opto-isolation box (MCETOOLV2.0), 3.3V single supply. This evaluation board is
used with Isolation box (MCETOOL V2). Details of isolation box please refer to its Application Note.
The EVAL-M1-183M evaluation board is available from Infineon. The features of this board are described in the
design feature chapter of this document, whereas the remaining paragraphs provide information to enable the
customers to copy, modify and qualify the design for production according to their own specific requirements.
Environmental conditions were considered in the design of the EVAL-M1-183M. The design was tested as
described in this document but not qualified regarding safety requirements or manufacturing and operation
over the whole operating temperature range or lifetime. The boards provided by Infineon are subject to
functional testing only.
Evaluation boards are not subject to the same procedures as regular products regarding Returned Material
Analysis (RMA), Process Change Notification (PCN) and Product Discontinuation (PD). Evaluation boards are
intended to be used under laboratory conditions by specialists only.
Figure 1 shows the evaluation board EVAL-M1-183M.This document explains the features and details of this
board as well as IRMCF183 control IC.
Figure 1 Evaluation board EVAL-M1-183M