Infineon EVAL-IH-R5IPB-A-V1, User Manual, Page: 6 / 34

EVAL-IH-R5IPB-A-V1 Evaluation board
User Guide
Introduction
Figure 2 Scope of delivery: evaluation board, spare parts and USB drive with documentation (the
picture is only for illustration purpose)
For guaranteeing safe measurement procedures, testing points have been provided on the board for the key
signals. The following additional accessories/testing equipment may be useful for performing proper
measurements:
• Ground spring PK007-016 [3] or probe tip to PCB adapter PK106-4 [4], both from Teledyne LeCroy, for
accurate measurements of low voltage signals.
•
PEM CWT1 ultra-mini Rogowski current waveform transducer for measuring the collector current of the IGBT
[5].
In order to exploit all the benefits of the IEWS20R5135IPB, specific electromagnetic compatibility (EMC) tests can
be performed on the evaluation board (e.g. EFT/bursts, power fail and surge) by means of the following
additional equipment:
•
Emtest Compact NX5, multifunctional test generator for transients up to 5.5 kV [6].
Application Note 6 of 34 V 1.1
2019-11-25