Infineon CYPRESS FM4 MCU S6E2CC, Manual, Page: 10 / 13

FM4 S6E2CC Series External Memory Programmer
www.cypress.com
Document No. 002-04471 Rev. *B 9
Figure 5. File abnormal error
If the SD card is inserted and the target file is correct, the LED status will be shown as the following figure:
Figure 6. File correct
If the LED status is as shown above (all LED on), the user can press the
‘Op’ key to start the programming of the
target board.
Result and status check
During the programming process, the status of LED3 is as shown in the following figure (LED3 on).
Figure 7.Programming
If the program is successful, the LED status is shown as the following figure (all off):