2.3
Pin assignment
To use the PROFET
™
+2 Arduino Shield the necessary control signals can be applied directly at the connectors.
There is no need to use a microcontroller compatible with Arduino or XMC
™
1100 Boot Kit to get the PROFET
™
+2
Arduino Shield into an application. The control pins are logic level inputs which can be driven by any other
microcontroller or with logic level signals. Besides the supply voltage V
bat
has to be provided to the V
bat
connector. The
below shows the pin-out and the connectors of the PROFET
™
+2 Arduino Shield.
PROFET
™
+2 12V Arduino Shield
2 Board description
User Manual
9
Rev. 1.00
2019-10-23
