User guide
8 of 19
Revision 1.0
2019-05-07
Demoboard BTS3011TE
User Manual
Software Utilisation
3
Software Utilisation
•
Software “
Demoboard_Aiko_Universal
.exe” is a GUI for Windows OS, used with Arduino UNO board with the
dedicaded code “
Demoboard_Aiko_Universal
.ino”.
3.1
Installation
•
User has to install the Arduino IDE software to allow communication between comuter and Arduino board
•
Once the program is installed, connect the Arduino Shield. Double-click the
“
Demoboard_Aiko_Universal
.ino” Arduino code and upload it.
•
When the code is correctly uploaded / installed, the user can plug the demoboard on the Arduino shield. The
green LED must turn-on, meaning that BTS3011TE logic is supplied
•
Then, launch the “
Demoboard_Aiko_Universal
.exe”.
−
Click on “Ports” to select the right communication port on your Arduino board.
−
Click on “Start” to start the system.
▪
If it’s not working, check your port name (usually called “COM X”, where X is a number).
−
If installation is done and operational, user can see text transmitted by Arduino board below
the port selector.
3.2
Features
3.2.1
Overview Panel
Figure 7
This panel can select the Port communication Start and Stop communication
