Application Note
page 9 of 32
V1.0
2021-03-31
Distance2GoL (Software-Controlled FMCW) low-power radar shield using
BGT24LTR11 for range detection and human tracking
Getting started
STEP 4
STEP 5
STEP 6
Download SW/HW package
•
Open “
Infineon Toolbox
”.
•
Click on “
Distance2GoL Kit
”.
•
Follow the instructions
mentioned on the left tab
“
Getting Started
”
.
•
Save the setup file and run it.
•
Browse to the preferred
location to store the files.
Connect board
•
Insert the micro-USB
cable into the Radar
Baseboard XMC4700
“
Debug
”
port.
•
Insert the USB connector
into the PC
’s
USB port.
If the device driver is not
recognized
:
Right-click on
“
My Computer
”
Manage
Device Manager
Other devices
Right-click
on
“
Unknown device
”
Update Driver Software
Browse
Firmware_Software
XMC_Serial_Driver.
Firmware update
•
Download and install
SEGGER J-Link USB driver for
Windows:
•
Connect board as
STEP 5
•
Open
Infineon Toolbox
Radar GUI
Device
Flash
Firmware
.
•
Select Device
“
Distance2GoL /
Sense2GoL Pulse
” and select
“
D2GL_SC_FMCW.hex
”
.
Firmware
•
Click on “
Flash Firmware
”
.
Figure 3
Steps 4 to 6 to get started with the Distance2GoL demo board
www.segger.com/download
s/jlink/#J-
LinkSoftwareAndDocument
ationPack
Optional
D2GL-HW-SW
.exe
Optional
