Infineon 1ED44175, Manual, Page: 10 / 42

User guide 10 of 41 v1.0
2021-03-05
5 kW two-channel interleaved CCM PFC EVAL board
IKW40N65WR5, IDW60C65D1 and 1ED44175 in high frequency PFC application
System and functional description
2.1.4 1ED44175 - low side gate driver
1ED44175 is an EiceDRIVER™ 25 V single -channel low-side non-inverting gate driver for IGBT with typical 2.6 A
source and sink currents in a tiny 6-lead PG-SOT23 package. 1ED44175N01B provides cost and space savings by
integrating the comparator. The new low-
side gate driver utilizes Infineon’s proprietary latch immune CMOS
technologies to enable a rugged monolithic construction while achieving best-in-class fault reporting accuracy
with an OCP threshold tolerance of +/-5%. Its features are listed as follows:
•
-0.246 V over current threshold with accurate ±5% tolerance
•
Over current detection with negative voltage input
•
Single pin for fault output and enable
•
Programmable fault-clear time
•
Under voltage lockout for IGBTs
•
CMOS Schmitt-triggered inputs
•
3.3 V, 5 V and 15 V input logic compatible
•
Output in phase with input
•
-10 Vdc negative input capability of OCP pin
•
3 kV ESD HBM
2.2 Board specifications
Table 2 depicts the key specifications of the reference design used in the EVAL-PFC5KIKWWR5SYS.
Table 2 EVAL-PFC5KIKWWR5SYS specifications
NO. Parameters Symbol Value
1 Output power P
out
5000 watt
2 Input voltage range (rms) V
in
180 V
ac
to 264 V
ac
3 Input frequency range f 50 Hz or 60 Hz
4 Ouput voltage V
DC
400 V
5 Output ripple voltage V
ripple
20 V
6 Inductance L1, L2
53
µ H
7 Switching frequency F
s
60 kHz