Infineon Technologies TC1796, User Manual

Page: 1912 / 2150

TC1796
Peripheral Units (Vol. 2 of 2)
General Purpose Timer Array (GPTA)
User’s Manual 24-257 V2.0, 2007-07
GPTA, V2.0
24.6.4.2 MSC Controller Connections
The MSC interfaces (MSC0 and MSC1) provide a serial communication link typically
used to connect power switches or other peripheral devices. Each output multiplexers of
GPTA0, GPTA1, and LTCA2 generates 7
×
8 = 56 output lines OUT[111:56] grouped
into seven output groups. These 56 output lines OUT[111:56] are wired to 32 MSC0
inputs and 24 MSC1 inputs.
Figure 24-90 shows the interconnections among the
MSC0/1 modules and the three GPTA modules. The source for each line of the
ALTINL/ALTINH MSC input buses can be selected via a multiplexer connected either to
GPTA0 output x, GPTA1 output x, or LTCA2 output OUTx (x = 56-111).
Figure 24-90 GPTA-to-MSC Multiplexer
OG0 of GPTA0
MCA05999
MSC0
OG0 of GPTA1
OG0 of LTCA2
ALTINL[7:0]
MUX
ALTINL[15:8]
MU
X
ALTINH[7:0]
MU
X
ALTINH[15:8]
MU
X
ALTINL[7:0]
MU
X
ALTINL[15:8]
MU
X
ALTINH[7:0]
MU
X
MSC1
MMXCTR10
OUT[63:56]
OUT[63:56]
OUT[63:56]
OG1 of GPTA0
OG1 of GPTA1
OG1 of LTCA2
OUT[71:64]
OUT[71:64]
OUT[71:64]
OG2 of GPTA0
OG2 of GPTA1
OG2 of LTCA2
OUT[79:72]
OUT[79:72]
OUT[79:72]
OG3 of GPTA0
OG3 of GPTA1
OG3 of LTCA2
OUT[87:80]
OUT[87:80]
OUT[87:80]
OG4 of GPTA0
OG4 of GPTA1
OG4 of LTCA2
OUT[95:88]
OUT[95:88]
OUT[95:88]
OG5 of GPTA0
OG5 of GPTA1
OG5 of LTCA2
OUT[103:96]
OUT[103:96]
OUT[103:96]
OG6 of GPTA0
OG6 of GPTA1
OG6 of LTCA2
OUT[111:104]
OUT[111:104]
OUT[111:104]
MMXCTR01
MMXCTR11
MMXCTR00