10 – 8
Transpector CPM Operating Manual
10.5 CPM Configuration Monitor
The
Configuration Monitor
allows experimentation to determine the combination
of data acquisition parameters that provide the most appropriate runs. Data
acquisition parameters can be changed and the effect of the change is displayed.
NOTE:
The CPM
Configuration Monitor
window is different from the open ion
source instruments’
Sensor
window because of the pumping and inlet
systems on the CPM.
Figure 10-13 Transpector CPM configuration monitor
1
Pump down the system.
1a
Click
Pump Down (inlets closed)
to start the foreline and turbo pumps
and open the foreline valve. Select
Pump Down (inlets open)
if there is
an additional isolation valve in front of the Hexblock and the volume
between the isolation valve and the Hexblock needs to be pumped down.
See
for approximate times to pump down
trapped volumes.
Valve
Pump Down
RGA Total
Bakeout Button
Foreline
Process
Edit Data
Turbo Pump Speed
Pressure
Pressure
Status
Buttons
Shut Down
Button
Pressure
Current Data
AcquisitionParameters
Acquisition
Parameters
