Inficon Micro GC Fusion 2-Module Operating Manual Download

Page: 177 / 319

INFICON

Software Operation | 9

074-594-P1H Micro GC Fusion Operating Manual

177 / 319

9.6.2 Run Sequence

If a sequence is set as preset, it displays on the Micro GC Fusion main page. Click on
the sequence to load it. Alternately:

1 In the Method/Sequences window, click on the sequence to highlight it.
2 Click Load.
3 Click the

icon to display the main page.

4 Click the green RUN button to begin the sequence.
5 When a sequence is running, two icons are displayed at the bottom of the

screen.

Mouse over the

icon to identify the sequence that is currently running

and the current status of the sequence.

Mouse over the icon to identify the method in the sequence that is
currently running.

9.6.3 Stop a Sequence

To stop a sequence:

1 In the Run tab, click the red STOP button.
2 Micro GC Fusion finished the current run and returns to the initial state of the

currently loaded method. This state may take a few minutes depending on the
progress and duration of the interrupted method.

3 The notification Sequence will stop when method completes is displayed,

advising that the sequence will stop when the current run completes.

Summary of Contents for Micro GC Fusion 2-Module
































































































































































































































































































































Search results

Summary of Contents for Micro GC Fusion 2-Module

Reviews:

Related manuals for Micro GC Fusion 2-Module

Brands by name

Popular brands

Inficon Micro GC Fusion 2-Module, Operating Manual

Search results

Summary of Contents for Micro GC Fusion 2-Module

Reviews:

Related manuals for Micro GC Fusion 2-Module

Brands by name

Popular brands