Inficon 551-010, Operating Instruction

Page: 7 / 56

Important safety instructions
7
2 Important safety instructions
Notice: Before commissioning the RC1000 remote control,
carefully read all safety instructions and make sure that
you have properly understood them.
2.1 Intended use
The RC1000 remote control has been designed to operate
the UL1000, UL1000 Fab, UL5000 and Modul1000 leak test
devices.
The former wired remote control (catalog no. 200 99 022) can
be replaced by the RC1000.
The RC1000 remote control must only be used for the
purpose and within the context outlined in this manual.
Use only INFICON accessories.
2.2 User requirements
• The user must be familiar with the function of the device;
he or she may only connect and operate the device after
having read and understood the operating instructions.
• The user should consult local, state, and national
agencies regarding specific requirements and regulations
for devices with wireless transmission capability.
• In case of more questions regarding safety, operation
and/or maintenance, the user should contact our nearest
representative.
Skilled personnel
The RC1000 remote control must only be connected and
operated by properly trained staff.