Inficon 551-010, Operating Instruction

Page: 34 / 56

34
Operating the remote control
5.3.6 Recorder
Recording measurements, copying or
deleting recorded data
• Select „Settings“ to start, to stop or to
configure the recording of
measurements.
Opens a submenu (see
Fig. 18 ).
• Select „Copy“ to write recorded data to a
plugged-in USB stick.
Opens a submenu (see
Fig. 19 ).
• Select „Delete“ to erase data from the
internal memory.
Opens a submenu (see
Fig. 20 ).
Fig. 17 Recorder menu
Preparing and configuring of recording
• Select „Auto record On“ to prepare the
recording.
The recording to a new data file will start
if the measurement mode will be
activated.
If the measurement mode is stopped
again the recording quits and the data file
is closed.
• Select „Auto record Off“ if no recording
should be done.
• „Interval“ is the duration between the
storage of two measured values to the
data file.
• „Memory location“ selects the storage to
the USB stick or the internal memory.
Fig. 18 Recorder submenu settings