With the carrier hanging down in front of you,
fasten the “lumbar belt” around your natural
waist. You will hear “click” when buckle is secure.
Instructions:
1.
2.
3.
1
Carrier use for an Infant: Facing-In Position
* IMPORTANT! Before releasing your hold on the
baby, ensure that the “shoulder straps” are
securely in place.
4.
While holding the baby securely with the left
hand, slip the “shoulder strap” onto your right
shoulder. Switch hands and repeat with the other
“shoulder strap.”
4.
* IMPORTANT! Read and follow all warnings and instructions before assembling
and using your carrier.
* IMPORTANT! Baby must be carried in this position until he/she is able to hold
their head upright without assistance.
* IMPORTANT! Keep one hand on the baby until all the buckles and straps are
properly fastened.
Tighten the “lumbar belt” by pulling on the webbing
strap until carrier fits firmly against your body.
* IMPORTANT! ALWAYS ensure that the lumbar belt
fits securely againt your body at all times without
creating a gap your child can fall through.
Lift baby up facing towards you and place them
high up on your chest. Baby’s legs will be naturally
open with a comfortable bend at the knees.
* IMPORTANT! Keep one hand on the baby until all
buckles and straps are properly fastened.
CORRECT
INCORRECT
To bring the baby close against your body
(or for a more comfortable fit), tighten the
“shoulder straps” by pulling on the “top
shoulder strap tighteners.
* IMPORTANT! Before releasing your hold on
the baby, ensure the “shoulder straps” are
securely in place.
5.
Once the straps are secure on your shoulders,
reach over your shoulders and attach the “chest/
back strap” to connect the two “shoulder straps”
together. You will hear a “click” when secure. Pull
to tighten. If you have difficulty reaching the
buckle ask another person for assistance.
6.
7.
Fit the baby securely in carrier by adjusting the
webbing on the “leg strap.”
* Note: Baby’s head should be turned to one
side and not buried against your chest to
ensure a clear source of air.
8.
Pull forward on the “shoulder straps” to adjust
carrier for a comfortable fit.
9.
Roll up any excess webbing and secure
with the elastic “tidy loop.” Repeat with
each strap to keep the carrier neat and
any excess straps out of the way.
5.