18
Disruptions
Causes
Solutions
The machine
will not start
Machine not powered
Reconnect it
Fault D01
Battery discharged
Recharge the battery.
Fault D02
Too heavy strain
Mechanical jam
Restart by pressing the trigger
once.
If the problem persists, contact
your dealer.
Fault D14
Safety brake acti-
vated
With the chain saw, check that
the chain brake handle is present
and check that the chain brake is
released.
Incorrect tool de-
tection
Disconnect for 5 seconds, then
reconnect.
Check the tool assembly.
If the problem persists, contact
your dealer.
Other
Contact your dealer.
Machine stops
when in use
Fault D01
Battery discharged
Recharge the battery.
Fault D02
Too heavy strain
Change the work method or ask
your dealer for advice.
Restart by pressing the trigger
once.
Fault D14
Safety brake acti-
vated
Unlock the brake.
Check the tool assembly.
As soon as the green indicator
comes back on, restart by pressing
the trigger twice.
Other
Contact your dealer.
The machine stays
on standby
Overheating
Wait for the machine to cool and
restart using two presses on the
trigger.
Incorrect tool de-
tection
Disconnect for 5 seconds, then
reconnect. Check the tool assem-
bly. If the problem persists, contact
your dealer.
troubleshooting
