infaco electro'flor, User Manual

Page: 8 / 20

USAGE AND SAFETY PRECAUTIONS
The ELECTRO’FLOR is fitted with an electronic protection system. As soon as the
brush meets too much resistance and stops rotating, the electronic system stops
the motor. You will need to press the trigger again to restart the machine. For safety
and practical reasons, we strongly recommend that you use the case supplied for
carrying the battery on your work site.
We also recommend that you keep the
machine’s protective tube in case you have to send it back to the factory for
after-sales service.
Always keep your hands away from the brush when the machine is in
operation.
1. Always disconnect the
ELECTRO’FLOR at socket Nos. 4 and 5 for all operations
other than skimming and PARTICULARLY IF YOU HAVE TO REPLACE A
BROKEN WIRE.
2. Every morning, check that the brush is held tightly in the chuck. To do this,
disconnect socket No. 4.
For your safety, the electronic system is equipped with an extra safety system that
cuts off the power supply to the ELECTRO’FLOR after it has not been used for 1
minute. You will then need to press trigger No. 10 3 times to switch your machine
back on.
N°20
– Speed variator
N°7
– LED light
N°10
– On/off
trigger
N°5
– Power supply
connection